ICP DAS WISE-4000D - WISE-4000 with display
by ICP DAS

Name: ICP DAS WISE-4000D - WISE-4000 with display
Brand: iComTech
SKU: WISE-4000D
Price: 1078.0 USD

3-channel Digital Input, 3-channel Digital Output, and 8-channel Analog Input GPRS Module with display, web browser configurable, allows users to implement IF-Then Else If type control logic and communicable over Modbus TCP. Supports operating temperatures from -15°C ~ +55°C. MiniOS7 Operating System.

Mfg SKU # :

WISE-4000D

List Price :

$1,099.00

Our Price :

$1,078.00

Description
Specification
Datasheet

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as a controller in various industrial applications. WISE offers a user-friendly and intuitive web site interface for configuration via Ethernet locally. This allows users to implement IF-THEN-ELSE control logic on controllers with just a few clicks; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.

The WISE-4000 is equipped with a cellular transceiver that sends data to cell phones via text messages. This includes alarm notification, scheduled data sending, and conditional sending of messages.

The WISE-4000 is also am M2M (Machine to Machine) embedded controller. With a wired Ethernet connection, back end systems and SCADA software can monitor the WISE-4000 to get updated status information with the widely used Modbus TCP protocol. This also allows sending of e-mails and sharing of data with other WISE modules with our P2P function.

It features 3 digital inputs, 3 digital outputs and 8 analog inputs. With an IF-THEN-ELSE rule engine, WISE-4000 even provides more powerful functions such as Schedule, Send SMS, Send e-mail, Timer & I/O operation for use in various industrial applications.

Hardware Specifications

Digital Input
Input Channels		3
nput Type		Source(Dry Type), Common Ground
On Voltage Level		+3.5 VDC ~ +30 VDC
Off Voltage Level		+1 VDC Max.
Isolated Voltage		Non-isolated
Counters	Max. Count	65535 (16 bits)
	Max. Input Frequency	50 Hz
	Min. Pulse Width	10 ms
Digital Output
Output Channels		3
Output Type		Open Collector (Sink/NPN)
Load Voltage		+30 VDC Max.
Load Current		100 mA Max.
Isolated Voltage		Non-isolated
Counters	Max. Count	65535 (16 bits)
	Max. Input Frequency	50 Hz
	Min. Pulse Width	10 ms
Analog Input
Input Channels		8
Input Range/Type		0~20 mA
Resolution		12-bit
Sampling Rate		1 KHz max. (Read one channel)
Model		WISE-4000	WISE-4000D
System
CPU		80 MHz internal microprocessor
SRAM/Flash		512K/512K, real time clock, watchdog timer
NVRAM		31 bytes, battery backup, data valid up to 10 years
EEPROM		16 KB
Communication Interface
COM ports		COM1:5-wire RS-232; COM2: RS-485; COM3:3-wire RS-232
Ethernet		10/100 Base-TX Ethernet controller
GPRS Interface
Frequency Band		Quad-band 850/900/1800/1900 MHz
SMS		MT, MO, CB, Text and PDU mode
LCD Interface
General	Effective display area	-	80.61 mm x 14.37 mm (W x H)
	Module Dimension	-	93 mm x 70 mm x 1.6 mm (W x H x T)
Life Time		-	Expected life is more than 100,000 hours under normal operation
Power
Protection		Power reverse polarity protection
Frame Ground Protection		ESD, Surge, EFT, Hi-Pot
Power Requirement		15W; Unregulated +10 VDC ~ +30 VDC
Power Consumption		Idle: 75 mA @ 24 VDC; Data Link: 150 ~ 400 mA (peak) @ 24 VDC
LED Indicators
System		Red
GPRS		Yellow
Mechanical
Dimensions		72 mm x 123 mm x 35 mm (W x H x D)
Installation		DIN-Rail or Wall mounting
Environment
Operating Temperature		-20 °C ~ +70 °C	-15 °C ~ +55 °C
Storage Temperature		-40 °C ~ +80 °C	-20 °C ~ +70 °C
Humidity		5~90% RH, non-condensing

Software Specifications

Functions
36 IF-THEN-ELSE Logic Rules	3 IF conditions with AND or OR operators 3 THEN actions 3 ELSE actions
48 Internal Registers	Hold temporary variables and read/write data via Modbus/TCP address.
12 Timers	Delay / Timing functions.
12 Schedules	Setup prescheduled routine tasks.
12 Emails	Send Email messages to pre-set Email receivers.
12 SMS	Send SMS to pre-set mobile phone numbers.
Rule Configuration Website	Access Web server on WISE controllers to edit and upload logic rules through web browser.
Modbus/TCP Protocol	Real time control and monitoring I/O channels and system status of controllers via SCADA software.
IF Conditions
DI Channel	ON,OFF,ON to OFF,OFF to ON,Change
AI Channel	=,>,<,>=,<=(value)
Internal Register	=,>,<,>=,<=(value)
DI Counter	=,>,<,>=,<=(value),Change
DO Counter	=,>,<,>=,<=(value),Change
Timer	Timeout,Not Timeout
Schedule	In Range,Out Range
THEN / ELSE Actions
DO Channel	ON,OFF,Pulse Output
Internal Register	Change the value
DI Counter	Reset
DO Counter	Reset
Timer	Start,Stop
Schedule	Start,Stop
Email	Send
SMS	Send