The M-7043D offers 16 digital output channels, each of which are non-isolated and support sink-type output using an open collector. It also comes with an LED display for indication of the module status. There are also options to enable both power-on and safe values. They come with configurable power-on value settings and configurable safe value settings. They can be used with our free EZ Data Logger software for data logging and monitoring applications.
- Channels: 16 Digital Output
- LED indicated
- Digital output status
- Open collector to 30V max.
- Output current: 100mA per channel.
- Direct drive power relay module
Digital Output |
Channels |
16 |
Type |
Open Collector |
Sink/Source (NPN/PNP) |
Sink |
Load Voltage |
+3.5 ~ 30 VDC |
Max. Load Current |
100 mA/Channel |
Power-on Value |
Yes |
Safe Value |
Yes |
Communication |
Interface |
RS-485 |
Bias Resistor |
No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) |
Format |
(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
Baud Rate |
1200 to 115200 bps |
Protocol |
Modbus RTU, DCON |
Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
LED Indicator / Display |
System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
I/O LED Indicator |
Yes, 16 LED as Digital Output Indicator |
Power |
Reverse Polarity Protection |
Yes |
Input Voltage Range |
10~30VDC |
Power Consumption |
0.4W |
Mechanical |
Dimensions (L x W x H) |
123 mm x 72 mm x 35 mm |
Storage Temperature |
-40 to 85°C |
Environment |
Operating Temperature |
-25 to 75°C |
Storage Temperature |
-40 to 85°C |
Humidity |
5 to 95% RH, non-condensing |
|