• Video |
Video Compression |
H.264 (MPEG4 part 10), MJPEG |
Video Inputs |
1 (BNC connector) |
Video Output |
via Ethernet |
Video Streams |
3, H.264 or MJPEG video streams |
NTSC/PAL |
Auto-sensing or manual |
Video Resolution and FPS (frames per second) |
|
Video Viewing |
• DynaStream™ support for changing the video frame rate automatically
• Adjustable image size and quality
• Timestamp and text overlay
• Maximum of 10 simultaneous unicast connections, 50 multicast clients
• CBR Pro™ support for accurate streaming bit rate control
• Image manipulation: 180° rotation
• Image tuning: control brightness, contrast, saturation |
• Audio |
Audio Inputs |
1 Line-in or mic-in with 3.5 mm phone jack |
Audio Outputs |
1 Line-out with 3.5 mm phone jack |
Audio Format |
Mono, PCM (G.711) |
• Network |
Protocols |
IPv4/v6, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP,
IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS |
Ethernet |
2 10/100BaseT(X) Ethernet ports, RJ45 connector |
• Serial
Port |
PTZ Ports |
1 RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps |
COM Ports |
1 RS-232 or 485 port, DB9 male connector, 115.2 kbps |
Console Port |
1 RS-232 port, RJ45 connector |
• Local
Storage |
SD Socket |
Standard SD socket, V2.0 (SDHC) |
• GPIO |
Digital Inputs |
2, max. 8 mAHigh: +13 to +30 V; Low: -30 to +3 V |
Relay Outputs |
2, max. 24 VDC @ 1 A |
• LED
Indicators |
STAT |
Indicates if system is booted up properly or not |
PWR1 |
Power 1 |
PWR2 |
Power 2 |
FAULT |
Can be configured to correspond to system alarm, power failure, or
disconnected network |
VIDEO |
Video input signal |
PTZ |
Indicates if PTZ or COM port data has been transmitted |
SD |
Indicates if SD card was mounted successfully |
• Power
Requirements |
Input Voltage |
12 to 32 VDC, or 18 to 30 VAC |
Input Current |
0.85 A @ 12 VDC; 0.3 A @ 32 VDC; 0.85 A @ 18 VAC; 0.56 A @ 30 VAC |
• Physical
Characteristics |
Housing |
Metal, IP30 protection |
Dimensions |
46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in) |
Weight |
710 g (1.57 lb), including DIN-rail mounting kit |
Installation |
DIN-rail mounting (standard), wall mounting (optional) |
• Alarms |
Intelligent Video |
Camera tampering |
Video Motion Detection |
Includes sensitivity tuning |
Scheduling |
Daily repeat timing schedule |
Imaging |
JPEG snapshots for pre/trigger/post alarm images |
Custom Alarms |
HTTP event servers and CGI events for setting customized alarm actions |
Email/FTP Messaging |
Automatic transfer of stored images via email or FTP with
event-triggered actions |
Pre-alarm Buffer |
50 MB for JPEG snapshot images |
• PTZ
(Pan/Tilt/Zoom) |
PTZ Camera Control |
Via PTZ port or COM port |
PTZ Control Functions |
Pan, tilt, zoom, focus, moving speed, preset position (max. 128
positions) |
PTZ Function Updates |
Driver upload supported |
Supported Device Protocols |
Pelco D, Pelco P, Custom Camera |
• Security |
Password |
User level password protection |
Filtering |
By IP address |
Authentication |
802.1X |
Encryption |
HTTPS, SSH |
• Environmental
Limits |
Operating Temperature |
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Vibration |
IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g;
1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g; 1.86
hrs/axis |
Shock |
IEC 60068-2-27, 20g/11ms |
Altitude |
2000 m |
Ingress Protection |
IEC 60529, IP30 |
• Standards
and Certifications |
Safety |
UL 60950-1 |
EMC |
EN 55022/24 |
EMI |
CISPR 22, FCC Part 15B Class A |
EMS |
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11 |
Transportation |
NEMA TS2 |
• MTBF
(mean time between failures) |
Time |
647,088 hrs |
Standard |
Telcordia SR332 |
• Warranty |
Warranty Period |
5 years |
Details |
See www.moxa.com/warranty |
• Minimum
Viewing System Requirements |
CPU |
Pentium 4, 2.4 GHz or above |
Memory |
512 MB memory or above |
OS |
Windows XP/2000 with SP4 or above, Windows Vista, Windows 7 |
Browser |
Internet Explorer 9.x or above |
Multimedia |
DirectX 9.0c or above |
• Software
Development |
VPort SDK PLUS |
Includes CGI commands, ActiveX Control, and API library for customized
applications or system integration for third-party developers (the
latest version of SDK is available for download from Moxa’s website). |
Standard |
ONVIF, Profile S |