| Physical Ports |
|
| 10/100/1000Base-T(X) Ports in RJ45 With P.S.E. |
8 |
| Technology |
|
| Ethernet Standards |
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table |
2048 MAC addresses |
| Processing |
Store-and-Forward |
| LED Indicators |
|
| Power Indicator |
Green : Power LED x 2 |
| Fault Indicator |
Amber : Indicate PWR1 or PWR2 failure |
| 10/100/1000Base-T(X) RJ45 port and PoE indicator |
Green for port Link/Act.
Green for PoE power injected. |
| Fault contact |
|
| Relay |
Relay output to carry capacity of 1A at 24VDC |
| DIP-Switch |
|
DIP-Switch 1 |
Power-1 failed warning : (ON) enable, (OFF) disable |
DIP-Switch 2 |
Power-2 failed warning : (ON) enable, (OFF) disable |
| Power |
|
Redundant Input power |
Dual DC inputs. 24~36VDC on 6-pin terminal block. |
Power consumption (Typ.) |
7.8 Watts |
Overload current protection |
Present |
Reverse polarity protection |
NOT Present |
| Physical Characteristic |
|
Enclosure |
IP-30 |
Dimension (W x D x H) |
41(W) x 94.9(D) x 144.3(H) mm |
Weight (g) |
452 g |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-40 to 70°C (-40 to 158°F) |
| Operating Humidity |
5% to 95% Non-condensing |
| Regulatory approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Safety |
EN60950-1 |