|
|
|
IDS-5011-WG
- High Speed Air Connectivity : WLAN interface support up to 54Mbps link speed
- Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
- Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode 4 IP ranges : UDP
- NAT Pass-Through : the user can manage IDS-5011-WG through NAT router
- High Security Capability : SSL data encryption ; secured management by HTTPS and SSH ; IP Access : IP White List ; wireless : WEP/WPA/PA2/802.1X/TKIP
- Internet Communication : PPPoE authentication
- Update DNS Hostname : DDNS
- Event Warning by Syslog, Email, SNMP trap, and Beeper
- Configurable by Web-based and Windows utility (DS-Tool)
- Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/ Windows 7(32/64bit)
|
|
|
IDS-5011-WG is an innovative secure 1-port RS232/422/485 to 802.11b/g WLAN,
up to 54Mbps, and 1-port LAN device server featuring the standard features of
device server, such like TCP/IP interface and versatile operation modes :
Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the
Windows utility, DS-Tool, could configure multiple devices and set up the
mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and
PPPoE make it more convenient for administrators to configure ORing’s device
servers through NAT router from different IP domains or Internet via modem
remotely. On the other hand, IDS-5011-WG can simultaneously transfer data up to
5 redundant host PCs to aovid Ethernet connection breakdown or any host PC
fails. Further, IDS-5011-WG features HTTPS, SSH, SSL encryption, and 802.1X to
assure the security of critical data transmission. IDS-5011-WG supports
RS-232/422/485 and provides dual redundant power inputs, 12~48 VDC, on DC power
jack and terminal block to guarantee a non-stop operation. With wide operating
temperature, -10~65°C, and rugged IP-30 housing design, IDS-5011-WG could
operate in the harsh industrial environment. Therefore, IDS-5011-WG is the best
solution to the high demand of secure serial to WLAN critical data
communication.
| Physical Ports |
|
| 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX |
1 |
| WLAN interface |
|
| WLAN Standard |
IEEE802.11b/g |
| Operating Mode |
Client mode |
| Antenna and Connector |
2dBi antenna on reversed SMA connector |
| Radio Frequency Type |
DSSS, OFDM |
| Modulation |
IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM |
| Frequency |
America/FCC : 2.412~2.462 GHz (11 channels)
Europe CE/ETSI : 2.412~2.472 GHz (13 channels) |
| Transmission Rate |
IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps |
| Transmit Power |
IEEE802.11b/g : 16dBm |
| Receiver Sensitivity |
-81dBm @ 11Mbps, PER< 8%
-64dBm @ 54Mbps, PER< 10% |
| Encryption Security |
WEP : (64-bit ,128-bit key supported)
WPA / WPA2 :IEEE802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
TKIP encryption
802.1X Authentication supported |
| Serial Ports |
|
| Connector |
DB9(male) x 1 |
| Operation Mode |
RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by
DS-Tool |
| Serial Baud Rate |
110 bps to 230.4 Kbps |
| Data Bits |
5, 6, 7, 8 |
| Parity |
odd, even, none, mark, space |
| Stop Bits |
1, 1.5, 2 |
| RS-232 |
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND |
| RS-422 |
Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (4-wire) |
Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (2-wire) |
Data+, Data-,GND |
| Flow Control |
XON/XOFF, RTS/CTS, DTR/DSR |
| Network Features |
|
| Network Protocols |
ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP,
SSL, PPPoE, DDNS |
| LED
Indicators |
|
| Power Indicator |
PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator |
Green for port Link/Act at 100Mbps. Amber for port Link/Act at
10Mbps. |
| WLAN Indicator |
Green for WLAN Link /ACT |
| Serial TX / RX LEDs |
Red : Serial port is receiving data
Green : Serial port is transmitting data |
| Power |
|
| Redundant Input Power |
Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack |
| Power Consumption (Typ.) |
5 watts |
| Overload Current Protection |
Present |
| Reverse Polarity Protection |
Present on terminal block |
| Environmental |
|
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Operating Temperature |
-10 to 65°C (14 to 149°F) |
| Operating Humidity |
5% to 95% Non-condensin |
| Regulatory Approvals |
|
| EMI |
FCC Part 15, CISPR (EN55022) class A, |
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5
(Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock |
IEC60068-2-27 |
| Free Fall |
IEC60068-2-32 |
| Vibration |
IEC60068-2-6 |
| Warranty |
3 years |
|
|
