|
|
Moxa NPort IAW5250A-6I/O-JP - 2 -port RS-232/422/485 wireless device server with 802.11a/b/g /n WLAN, 4DI, 2DO, JP Band by MOXA
|
|
|
NPort IAW5250A-6I-O-JP_SUMMARY.html
- Serial device server with 6 or 12 digital IOs
- Links serial and Ethernet devices to an IEEE 802.11a-b-g-n network
- Connects serial-I-O data to the cloud through generic MQTT
- Supports MQTT connection with built-in device SDKs to Azure-Alibaba Cloud
- Supports MQTT connection with TLS and certificate in JSON and Raw data format
- microSD card for configuration backup-duplication and event logs, and data buffering when cloud connection is lost
- Supports repackaging the serial data size (up to 4K) to save the packet numbers that need to be sent to the cloud platform
- Supports redundant dual DC power inputs and 1 relay output
- Secure data access with WEP, WPA, WPA2
- Wireless Client function for flexible integration
- 4 kV serial surge protection
|
|
|
NPort IAW5250A-6I-O-JP_DESCRIPTION.html
The NPort IA5000A-I-O serial device servers, which have
built-in digital I-Os, provide maximum flexibility when you need to
integrate serial equipment in the field with an Ethernet network or
cloud platform. The cloud-ready device server can communicate with
IIoT applications, using generic MQTT or third-party cloud services,
such as Azure and Alibaba Cloud. The combination of digital I-Os makes
the device servers well-suited for a variety of industrial data acquisition
applications. The DI-Os on the device can be controlled over TCP-IP
using the Modbus TCP protocol and can be configured and secured from
a web browser. The device can also be installed as a COM Port on a
Windows-Linux PC to make it compatible with legacy applications.
NPort IAW5250A-6I-O-JP.html
Input-Output Interface
-
Digital Input Channels
-
Digital Output Channels
-
Isolation
-
Alarm Contact Channels
- Relay output with current carrying capacity of 2 A @ 30 VDC
Digital Inputs
-
Sensor Type
- Dry contact
Wet contact (NPN or PNP)
-
Dry Contact
- On: short to GND
Off: open
-
Wet Contact (DI to COM)
- On: 10 to 30 VDC
Off: 0 to 3 VDC
-
I-O Mode
-
Counter Frequency
-
Digital Filtering Time Interval
Digital Outputs
-
I-O Mode
-
I-O Type
-
Over-Current Protection
-
Over-Temperature Shutdown
- 175C (typical), 150C (min.)
-
Over-Voltage Protection
Ethernet Interface
-
10-100BaseT(X) Ports (RJ45 connector)
- 1
Auto MDI-MDI-X connection
-
Magnetic Isolation Protection
Ethernet Software Features
-
Industrial Protocols
-
Configuration Options
- Web Console (HTTP-HTTPS), Windows Utility, Telnet Console, Serial Console
-
Management
- DHCP Client, DNS, HTTP, IPv4, SMTP, SNMPv1-v2c-v3, TCP-IP, Telnet, UDP, ICMP
-
Windows Real COM Drivers
- Windows 95-98-ME-NT-2000, Windows XP-2003-Vista-2008-7-8-8.1-10-11 (x86-x64), Windows 2008
R2-2012-2012 R2-2016-2019 (x64), Windows Server 2022, Windows Embedded CE 5.0-6.0, Windows XP
Embedded
-
Linux Real TTY Drivers
- Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
-
Fixed TTY Drivers
- SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i,
Mac OS X
-
Android API
-
MIB
MQTT
-
Mode
- Alibaba IoT Platform Device, Azure IoT Hub Device, Publisher-Subscriber of MQTT
-
Version Supported
-
QoS Level
-
Secure Transmission
- TLS (1.0, 1.1, 1.2) encryption with user\'s root CA, Client certificate, Private key
-
MQTT General Features
- Clean Session, Keep Alive, Last Will Message, Retain Message
Security Functions
-
Authentication
-
Encryption
- HTTPS, AES-128, AES-256, HMAC, RSA-1024, SHA-1, SHA-256, SHA-384
-
Security Protocols
- SNMPv3
SSHv2 HTTPS (TLS 1.2)
Serial Interface
-
Connector
-
No. of Ports
-
Serial Standards
-
Baudrate
- 50 bps to 921.6 kbps (supports non-standard baudrates)
-
Data Bits
-
Stop Bits
-
Parity
- None, Even, Odd, Space, Mark
-
Flow Control
-
Pull High-Low Resistor for RS-485
- 1 kilo-ohm, 150 kilo-ohms
-
Terminator for RS-485
-
Surge
Serial Signals
-
RS-232
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
-
RS-422
-
RS-485-4w
-
RS-485-2w
WLAN Interface
-
WLAN Standards
-
Receiver Sensitivity for 802.11a (measured at 5.680 GHz)
- Typ. -91 @ 6 Mbps
Typ. -74 @ 54 Mbps
-
Receiver Sensitivity for 802.11b (measured at 2.437 GHz)
- Typ. -92 dBm @ 1 Mbps
Typ. -84 dBm @ 11 Mbps
-
Receiver Sensitivity for 802.11g (measured at 2.437 GHz)
- Typ. -91 dBm @ 6 Mbps
Typ. -73 dBm @ 54 Mbps
-
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz)
- Typ. -89 dBm @ 6.5 Mbps (20 MHz)
Typ. -71 dBm @ 72.2 Mbps (20 MHz)
-
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz)
- Typ. -89 dBm @ 6.5 Mbps (20 MHz)
Typ. -71 dBm @ 72.2 Mbps (20 MHz) Typ. -85 dBm @ 13.5
Mbps (40 MHz) Typ. -67 dBm @ 150 Mbps (40 MHz)
-
Spread Spectrum
-
Transmission Distance
- Up to 100 meters (in open areas)
-
Transmission Rate
- 802.11a-g: 54 Mbps
802.11b: 11 Mbps 802.11n: 6.5 to 150 Mbps
-
Transmitter Power for 802.11b
- 16±1.5 dBm @ 1 Mbps
16±1.5 dBm @ 11 Mbps
-
Transmitter Power for 802.11g
- 16±1.5 dBm @ 6 Mbps
14±1.5 dBm @ 54 Mbps
-
Transmitter Power for 802.11a
- 15±1.5 dBm @ 6 Mbps
14±1.5 dBm @ 54 Mbps
-
Transmitter Power for 802.11n (2.4 GHz)
- 16 dBm @ 1.5 Mbps (6.5 MHz)
12 dBm @ 1.5 Mbps (72.2 MHz)
-
Transmitter Power for 802.11n (5 GHz)
- 15 dBm @ 1.5 Mbps (6.5 MHz)
12 dBm @ 1.5 Mbps (150 MHz)
-
Wireless Security
- WEP encryption (64-bit and 128-bit)
WPA-WPA2-Enterprise (IEEE 802.1X-RADIUS, TKIP, AES)
WPA-WPA2-Personal
-
WLAN Modes
- Ad-hoc Mode, Infrastructure mode
Antenna Characteristics
Memory
-
microSD Slot
- Up to 32 GB (SD 2.0 compatible)
Power Parameters
-
Connection
-
Input Voltage
-
Input Current
Reliability
-
Automatic Reboot Trigger
-
Alert Tools
- Built-in buzzer and RTC (real-time clock)
Physical Characteristics
-
Housing
-
Dimensions
- 59.6 x 101.7 x 134 mm (2.35 x 4 x 5.28 in)
-
Weight
-
Installation
- Wall mounting (with optional kit), DIN-rail mounting
Environmental Limits
-
Operating Temperature
-
Storage Temperature (package included)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
Standards and Certifications
-
EMC
-
EMI
- CISPR 32, FCC Part 15B Class A
-
EMS
- IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V-m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 1 kV; Signal:
Ethernet: 2 kV, Serial: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
-
Radio Frequency
-
Safety
Declaration
MTBF
-
Time
-
Standards
- Telcordia (Bellcore) Standard TR-SR
|
|