Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
IES-2042FX-SS-SC - Rugged 4x 10/100TX (RJ-45) + 2x 100FX (Single Mode / SC) by ORing Industrial Networking

IES-2042FX-SS-SC - Rugged 4x 10/100TX (RJ-45) + 2x 100FX (Single Mode / SC)
by ORing Industrial Networking

Write a review Write a review
  • Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250
    units of connection)
  • Open-Ring supports other vendor's ring technology in open architecture
  • Multiple Redundant Ethernet technology RSTP/STP, O-Ring supported to protect
    your industrial network
  • Provides Fast recovery technology for Ethernet multi-redundancy
  • O-Chain support the multiple redundant ring technology
  • SNMP v1/v2c/v3 ,http server, telnet server support
  • Supports LLDP protocol
  • Configurable by Web-based and Windows utility (Open-Vision)
  • Event notification through Syslog, Email, and SNMP trap
  • Two 100Base-FX fiber ports support for long distance connection
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
Mfg SKU # : IES-2042FX-SS-SC
Our Price : $574.00
Stock : 2
Quantity :
IES-2042FX series are lite-Managed Redundant Ring Ethernet switches with 6x10/100Base-T(X) ports or 4x10/100Base-T(X) and 2x100Base-FX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IES-2060/2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, these switch is one of the most reliable choice for easy managed Fiber Ethernet application.
Physical Ports  
Fiber Ports Number 2
Fiber Ports Standard 100Base-FX
Fiber Mode Single-mode
Fiber Diameter (μm) 9/125 μm
Fiber Optical Connector SC
Fiber Ports Specifications Typical Distance(km) 30 km
Wavelength (nm) 1310 nm
Max. Output Optical Power (dBm) -8 dBm
Min. Output Optical Power (dBm) -15 dBm
Max. Input Optical Power (Saturation) 0 dBm
Min. Input Optical Power (Sensitivity) -34 dBm
Link Budget (dB) 19 dB
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 2048 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching bandwidth : 1.2Gbps 
VLAN : Port Based
Security Feature Enable/disable ports
VLAN to segregate and secure network traffic
Software Features STP/RSTP (IEEE 802.1D/w) 
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units 
DHCP Client 
Port base VLAN
LLDP (Link Layer Discovery Protocol)
Port configuration, status, statistics, monitoring, security
SNMP v1/v2c/v3 and private MIB support
Network Redundancy O-Ring
Fast recovery
Warning / Monitoring System Relay output for fault event alarming 
Syslog server / client to record and view events 
Include SMTP for event warning notification via email 
Event selection support
LED Indicators   
Power Indicator Green : Power LED x 3
Fault Indicator Amber : Indicates unexpected events occurred
R.M. Indicator Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
100 Base-FX Fiber Port Indicator Green for port Link / Act Amber for 100Mbps indicator
Fault contact   
Relay Relay output to carry capacity of 1A at 24VDC
Redundant Input Power Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Power Consumption (Typ.) 7 watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block
Physical Characteristics   
Enclosure IP-30
Dimensions (W x D x H) 52(W)x106.1(D)x144.3(H) mm
Weight (g) 670 g
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-40 to 158°F)
Operating Humidity 5% to 95% Non-condensing 
Regulatory Approvals   
EMI FCC Part 15, CISPR (EN55022) class A,
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) 346,491


Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.