Need assistance or guidance?

Contact us @: 1-800-301-9097
Login / Register Contact Us
 
LNX-2012GN-SFP-T - 20-Port Industrial Gigabit Managed Ethernet Switch, w/8*10/100/1000Tx and, + 12*100/1000 SFP Slots; EOT: -40~ by ANTAIRA

LNX-2012GN-SFP-T - 20-Port Industrial Gigabit Managed Ethernet Switch, w/8*10/100/1000Tx and, + 12*100/1000 SFP Slots; EOT: -40~
by ANTAIRA

Write a review Write a review
LNX-2012GN-SFP-T_SUMMARY.html
  • 8* 10/100/1000Tx Gigabit ports and 12*100/1000 SFP ports
  • Jumbo frame up to 9K Bytes
  • Redundant Ring (recovery time < 20ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy Does not support ERPS
  • Supports IP based bandwidth management
  • Supports application based QoS management
  • Supports IP police security function
  • Supports DOS/DDOS auto prevention
  • Supports DDM (Digital Diagnostic Monitoring) function (P1 ~ P8)
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
  • Support ACL, 802.1x User Authentication for security
  • Multiple notification for warning of unexpected event
  • Configurable by Web-based interface, Telnet and Console (CLI)
  • Supports LLDP Protocol
  • Rigid IP-30 housing design
  • DIN-Rail and wall mounting enabled
LNX-2012GN-SFP-T_DESCRIPTION.html Antaira's LNX-2012GN-SFP is a 20-port industrial Gigabit managed Ethernet switch embedded with 8*10/100/1000Tx Ethernet ports, and 12*100/1000 dual rate SFP slots for Gigabit fiber connections. It is a fully manageable Layer 2 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market's open standard protocol. The advanced network filtering and security functions, such as, IGMP, VLAN, QoS, SNMP, RMON, ModbusTCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LNX-2012GN-SFP is IP30 rated, DIN-rail mountable, and supports a standard operating temperature range of -40 to 75C. It also provides high EFT and ESD protection for industrial networking applications, such as, power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS, or any other outdoor or harsh environment.
LNX-2012GN-SFP-T.html See DataSheet

Copyright © 2024 iComTech. All rights reserved. Shopping Cart Software powered by ecMidas.