|
|
ISO-813/S - ISO-813 with DB-8325 daughter board by ICP DAS
|
|
|
32 Channel Single-Ended Isolated Analog Input Board with toolkits for LabView, Windows DOS/95/98/NT/200/XP and OCX. Linux and Dasylab drivers are provided. Includes CA-4002 D-Sub connector
|
|
|
The PISO-813 is a bus-type isolated 12-bit A/D board for IBM or compatible PCs with PCI bus. It features 10KHz data acquisition under DOS and Windows. The PISO-813 provides 32 single-ended analog inputs. The isolation range of PISO-813 is increased to 3000 V. It is the most cost effective isolated A/D board for the PCI Bus in the world. The PISO-813 has one 37-pin D-sub connector . It can be installed in a 5V PCI slot and can support true “Plug & Play “.
- PCI Bus
- 32 single-ended analog input channels
- 12-bit A/D converter ( ADS 774 or equivalent)
- 3,000Vdc photo-isolation protection
- Analog input range
- Bipolar: ±10V,±5 V, ±2.5V, ±1.25V, ±0.625V
- Unipolar: 0-10V, 0-5V, 0-2.5V, 0-1.25V
- Programmable gain control
- 3000Vdc/DC converter built-in
- A/D trigger mode: Software Trigger
- A/D data transfer mode: polling
- Software:
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab
- Applications:
- High speed data acquisition system
- Harsh environment operation
- Signal isolation
Analog Input |
Isolation Voltage |
3750 Vrms (Bus Type) |
Channels |
32 single-ended |
A/D Converter |
12-bit, 8 μs Conversion time |
Sampling Rate |
10 kS/s. max. |
FIFO Size |
N/A |
Over voltage Protection |
Continuous +/-35 Vp-p |
Input Impedance |
10 MΩ/6 pF |
Trigger Modes |
Software |
Data Transfer |
Polling |
Accuracy |
0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V |
Zero Drift |
+/- 25 ppm/°C of FSR |
General |
Bus Type |
5 V PCI, 32-bit, 33 MHz |
Data Bus |
8-bit |
Card ID |
No |
I/O Connector |
Female DB37 x 1 |
Dimensions (L x W x D) |
180 mm x 105 mm x 22 mm |
Power Consumption |
850 mA @ +5 V |
Operating Temperature |
0 ~ 60 °C |
Storage Temperature |
-20 ~ 70 °C |
Humidity |
5 ~ 85% RH, non-condensing |
Analog Input Range |
Model |
PISO-813 |
Gain |
1 |
2 |
4 |
8 |
16 |
Bipolar |
+/-10 V
+/-5 V |
+/-5 V
+/- 2.5 V |
+/-2.5 V
+/-1.25 V |
+/-1.25 V
+/-0.625 V |
+/- 0.625 V |
Unipolar |
0 ~ 10 V |
0 ~ 5 V |
0 ~ 2.5 V |
0 ~ 1.25 V |
0 ~ 0.625 V |
Sampling Rate Max. |
10 kS/s. max. |
10 kS/s. max. |
10 kS/s. max. |
10 kS/s. max. |
10 kS/s. max. |
|
|